Skip to main content

What do I do if there's an active leak I can't fix right away?

How to stop further damage when you find a leak you can't repair on the spot, and what to document before you leave.

Written by Katherine Hart

Sometimes you'll find an active leak you can't repair on the spot. Maybe you're waiting on approval, parts, or a different trade. Even when the repair has to wait, it's on you to take reasonable steps to stop further damage before you leave the property. A leaking HVAC unit left running or a supply line left open can turn a small repair into a big one for the resident and the property.

Quick Tip - Watch Here!

🚰 Your Responsibility On Site

  • Find and fix the source whenever you can

    • If the leak is within the scope of your job and you can repair it, do it.

  • If you can't fix it, mitigate it

    • Shut off the water, equipment or power feeding the leak so it stops causing damage while the repair is pending. Stopping active damage doesn't need to wait for approval.

  • Never leave an active leak running

    • Leaving a property with a leak you could have reasonably stopped may make you responsible for the additional damage.

🛠️ How to Mitigate a Leak

  • 1. Locate the source. Trace the leak back to the fixture, line or equipment it's coming from.

  • 2. Shut it off. Close the nearest shut-off valve, or turn off the equipment at the thermostat, switch or breaker. Use the main water shut-off if there's no local valve.

  • 3. Contain what's there. Place a bucket or towels under drips and move belongings out of the way when it's safe to do so.

  • 4. Confirm the leak has stopped. Wait a few minutes and check again before moving on.

  • 5. Talk to the resident. Make sure they understand every detail before you leave:

    • What you shut off and why, and not to turn it back on until the repair is complete.

    • Any next steps, like a return visit, a quote being submitted, or another trade coming out.

    • Tips to prevent further damage, like keeping a bucket or towels in place, moving belongings away from the area, and keeping an eye out for new water.

  • 6. Request approval or next steps. Submit for approval as usual. Can't stop the leak? Call the Lula Pro Support line at 913-444-9293 before you leave the property.

📸 Document & Close Out

  • Photograph the leak and any damage

    • Take photos of the source, water damage, and the shut-off or containment steps you took.

  • Add detailed Service Notes

    • When you close the job, include as much information as possible in your Service Notes: whether the leak was fixed or remains unresolved, what you shut off, whether the leak stopped, what you told the resident, and your recommended next steps.

  • Attach a quote for next steps

    • Once the job is completed, you can always attach a quote to the completed job for any next steps or recommendations.

🤩 Bonus Tip: Shutting off the equipment keeps the issue from getting worse and protects you. Clear Service Notes and photos show exactly what you found and what you did if questions come up later.


✅ Common Leaks & How to Stop Them

Leak

Mitigation step

HVAC unit leaking

Turn the system off at the thermostat and/or breaker.

Water heater leaking

Close the cold water supply and turn off the gas or power.

Sink, toilet or appliance supply line

Close the local shut-off valve.

Pipe leak with no local valve

Close the main water shut-off.

* Can't stop the leak? Call the Lula Pro Support line at 913-444-9293 before you leave the property.


[Insert :lulalife: emoji here at 50px, centered]

Other Resources

Did this answer your question?